Flooring contractor insurance has to deal with a specific problem: you work late in the job, in finished rooms, surrounded by other people’s expensive work. Joinery, painted walls, glass doors and appliances are all within reach of a sander, a trowel, a wet saw or a drum of two-pack coating. The core cover is public liability with an accurate occupation description, and our tradies insurance page sets out the wider range of covers. This guide goes through the risks specific to timber, tile, vinyl and epoxy work.
Describe the Work You Actually Do
Flooring is not one occupation. Floor sanding and polishing, timber installation, tiling, waterproofing, vinyl and carpet laying, and resin or epoxy coating each carry different risks, and insurers rate them differently.
- If you tile, say whether you also waterproof.
- If you lay timber, say whether you also sand and coat.
- If you apply epoxy, say whether the work is residential garages or commercial and industrial floors.
- If you lift old floors, say whether that includes older materials that may contain asbestos, and how you handle them.
The occupation on the schedule defines the business the insurer agreed to insure. Our article on why the occupation matters on liability insurance explains what can happen when the description and the work do not match. Licensing for some flooring work, including waterproofing, can vary by state, so check what applies where you work.
Damage to Client Property
The claims flooring trades face tend to involve other people’s property rather than the floor itself:
- Dust and debris. Sanding dust can get into joinery, ducted air-conditioning and electronics.
- Water. Wet saws, slurry and cleaning can damage adjoining floors, plasterboard and ceilings below, particularly in apartments.
- Fixings. A nail or screw through a water pipe, heating cable or electrical cable can cause damage well beyond the room.
- Coatings. Overspray, spills and fumes affect surfaces and occupants, and solvent-based products bring a fire risk.
- Moving furniture and appliances can scrape walls, doors and the floors you are not working on.
Public liability can respond to accidental damage to third party property, depending on the policy wording. Check how your policy treats property in your care, custody or control, such as furniture you move or a room you have exclusive use of, because some wordings limit or exclude it.
Oily Rags and Fire
Rags soaked in some oil-based finishes can heat up and ignite on their own as the oil cures. A bag of rags left in a garage, a bin or the back of a ute can start a fire that damages far more than the floor. Follow the manufacturer’s disposal instructions for every product you use, and never leave used rags at a client’s home.
Heat guns used to lift old coverings, and grinders on hard surfaces, can also be treated as hot work. Check whether your policy has hot work conditions, such as fire extinguishers on hand and a check of the area after the work finishes.
Defective Workmanship Exclusions
Public liability is not a warranty for your work. Liability policies typically exclude the cost of fixing, replacing or redoing your own faulty work. Where faulty work causes damage to other property, that resulting damage may be treated differently, depending on the wording.
- Floor failures. Cupping, lifting, cracked tiles and delaminated coatings are generally workmanship matters. The cost of relaying the floor is unlikely to be paid by a liability policy.
- Resulting damage. If failed waterproofing lets water into the unit below and damages its ceiling and contents, that damage may be dealt with differently from the cost of redoing the waterproofing. Our post on strata water damage explains how these leaks play out in apartment buildings.
- Getting to the damage. Some wordings respond to the cost of pulling up sound work to reach resulting damage, sometimes called rip and tear. Others do not. Ask how yours reads.
Records help on both sides of the line: moisture readings before laying timber, product data sheets, manufacturer installation instructions and photographs of the substrate before you cover it.
Products You Supply
If you supply the timber, tiles, adhesive, underlay or coating as well as installing it, you carry a products exposure as well as a workmanship one. A tile that is slippery when wet, an adhesive that fails or a coating that releases fumes can all lead to claims. Products liability typically sits alongside public liability on the same policy, but check that it is included and at what limit. If you import product directly, tell your broker, because importers can be treated as the manufacturer and carry more of the risk. See our guide to products liability insurance.
Tools, Vans and Materials
Floor sanders, edgers, polishers, grinders and dust extraction units are expensive and easy to steal from a van or an unattended site. Tools cover should list high-value items, and you should know whether theft from an unattended vehicle requires forced entry or overnight garaging. Materials carried in the van for tomorrow’s job may need their own item. Our guide to tools of trade insurance covers the common conditions.
Subcontractors and Bigger Jobs
If you use subcontract layers or sanders, check whether your policy extends to work they do for you, and ask for their own certificate of currency. Builders and strata managers commonly ask flooring contractors for a certificate of currency and a minimum liability limit before work starts. Read what the contract requires and check it against your policy before you sign.
Setting Up Flooring Contractor Insurance
- Public liability with an occupation description that names every flooring activity you do. Our public liability insurance page explains limits and options.
- Products liability, particularly if you supply materials.
- Tools and equipment, with sanders and grinders itemised.
- Commercial vehicle cover for the van and any trailer.
- Personal accident and sickness cover, since knees, backs and hands take the strain in this trade and an injury stops income.
- Contract works where a builder or client contract requires it.
For how these covers fit together across the trades, see our insurance for tradies overview.
Common Questions
Will public liability pay to relay a floor that failed?
Generally not. The cost of redoing your own work is typically excluded. Resulting damage to other property may be treated differently, depending on the wording.
Do I need to tell my insurer that I do waterproofing?
Yes. Waterproofing is a higher-risk activity for liability insurers, and some policies exclude it or need it declared. Tell your broker, and check any licensing requirements in your state.
What about fumes from coatings affecting a client’s household?
Injury to third parties can fall within public liability, subject to the wording and any pollution exclusions. Follow product ventilation and re-entry instructions, and record that you passed them on to the client.
Talk It Through
Request a quote or call 1300 983 940 and we will match the occupation wording and limits to the floors you actually lay.
General advice only. This article does not take your objectives, financial situation or needs into account. Consider the relevant PDS and Target Market Determination before deciding on a policy.