B-Double Insurance: Road Trains, Trailers and Rollovers
Brokers available Mon – Fri, 9:00am – 5:00pm Make a Claim  ·  hello@insuregroup.com.au
Insuregroup — specialist insurance brokers
Business Insurance
Property
Earthmoving Insurance
Vehicle Insurance
Finance
About
Claims
Contact
Get a Quote Call 1300 983 940
Insurance Insight

B-Double Insurance: B-Triples, Road Trains and Trailers

Published 21 November 2026 · 6 min read

  1. Home
  2. Insurance Insights
  3. B-Double Insurance: B-Triples, Road Trains and Trailers

B-double insurance is not one policy on one vehicle. A B-double is a prime mover towing two trailers, the lead trailer carrying a fifth wheel for the second, and each part has its own value, its own registration and its own line on the schedule. B-triples and road trains add more trailers and dollies. The prime mover insurance is the starting point, but the combination is where the value and the exposure sit.

Trailers as Separate Insured Items

Each trailer and converter dolly should be listed on the schedule with its own value, registration and basis of settlement. The gaps tend to appear in the same places:

  • Unlisted dollies. A converter dolly is a significant piece of equipment and an easy one to leave off.
  • Swapped trailers. If trailers move between prime movers, the policy should respond to each trailer whichever unit is towing it. Our article on how trailers sit under a truck policy goes through where that goes wrong.
  • Specialised bodies. Tankers, refrigerated trailers, livestock crates and side tippers carry different values and different exposures. See semi-trailer insurance for how trailer types are rated.
  • Outdated values. Trailer values move with the market and with the age of the fleet. Review them at every renewal.

Trailers You Do Not Own

Contract work can involve hauling trailers owned by a customer or another carrier. Damage to a trailer you tow but do not own is not automatically included in your motor policy. Trailer in control insurance deals with that liability. Check the limit per trailer and per combination, and whether it responds when you are towing a whole set of someone else’s trailers.

Rollover and Jack-Knife

Multi-trailer combinations are exposed to rollover and jack-knife in ways a rigid truck is not. Rear trailer sway, load shift, liquid surge in tankers, soft road shoulders and sudden braking can all start an incident. When it happens, several insured items can be damaged at once, along with the load, the road and anything nearby.

Questions to ask before it happens:

  • Does the excess apply per vehicle, per trailer or per event? On a combination, the difference can be significant.
  • What is the limit for towing, recovery and removal of debris, and does it apply to the whole combination or to each unit?
  • Is the load insured separately under a goods in transit policy, and does that include recovery and transfer of the load?
  • Does the liability limit reflect road closures, damage to infrastructure and clean-up of a spilled load?

Load restraint, speed management on curves, trailer maintenance and driver training are the controls that reduce the chance of a rollover. Records of each also help when an insurer is assessing what happened.

Coupling, Uncoupling and Parked Trailers

Not every combination loss happens at highway speed. Trailers can roll away when uncoupled on a slope, landing legs can collapse on soft ground, and a coupling that is not properly locked can release a trailer on the road. Parked trailers at depots, truck stops and customer sites face theft of the trailer or its load, vandalism and fire.

  • Check that the policy responds to trailers while uncoupled and parked, not only while attached to an insured prime mover.
  • Check any security conditions for trailers left loaded overnight, such as locked yards or kingpin locks.
  • Build coupling checks into pre-start procedures, and record them.

Higher Values, Higher Stakes

A late-model prime mover and two or three trailers represent a large concentration of value in one unit on the road. That affects several settings:

  • Basis of settlement. Agreed value gives certainty on a total loss, while market value moves with the market. Our guide to market value versus agreed value sets out the trade-off for each unit.
  • Finance. Financiers commonly ask to be noted as interested parties on each financed unit, and a total loss payout needs to be weighed against the loan balance.
  • Downtime. Replacing a combination can take time, and the income lost while you wait is not part of the vehicle claim unless you insure it separately.

Route Permits and Access

B-doubles, B-triples and road trains operate on approved networks, and some movements need permits. Access rules vary by state and by route, and they change, so check the current requirements with the relevant road authority for the routes you run.

From an insurance angle, policies can include conditions about operating lawfully and within permit conditions. A driver who leaves the approved network, or runs outside a permit’s conditions, may create a claim problem as well as a compliance one, depending on the wording. Keep permits current, keep copies in the cab, and make sure drivers know the routes.

Drivers and Experience

Insurers look closely at who drives multi-trailer combinations: the licence class held, experience on the type of combination, driving history and training. Licence requirements for heavy combinations vary by jurisdiction, so check the current rules. Tell your broker before a driver moves up to B-doubles or road trains for the first time, and keep training, induction and assessment records on file.

Setting Up B-Double Insurance for the Fleet

  1. Schedule the prime mover and each trailer and dolly separately, with current values and registration numbers.
  2. Make sure the policy responds to trailers in any combination you run.
  3. Add trailer in control if you haul other people’s trailers.
  4. Check the excess structure, recovery limits and liability limits against a multi-trailer incident.
  5. Insure the load and your downtime separately if you need them.
  6. Review the prime mover and trailer schedule at each renewal, and whenever a unit is bought, sold or refinanced.

Common Questions

Do I need a separate policy for each trailer?

Not usually. Trailers are typically listed on the same truck or fleet policy, each as a separate item. What matters is that each one is listed and valued correctly.

If my prime mover is written off, are the trailers written off too?

Not necessarily. Each item is assessed on its own damage, so one may be repaired while another is a total loss. An excess may apply to each, depending on the wording.

Does moving from B-doubles to road trains change my premium?

It can. More trailers, longer routes and different freight change the risk, and the insurer needs to know before the change, not after the first incident.

Talk It Through

Request a quote or call 1300 983 940 and we will go through your combinations unit by unit, so every trailer and dolly is on the schedule at the right value.

General advice only. This article does not take your objectives, financial situation or needs into account. Consider the relevant PDS and Target Market Determination before deciding on a policy.

Next Step

Talk to a specialist broker

Tell us what you run and how you run it. We review the options across our insurer panel and come back with cover that fits — usually inside one business day.

Call Broker Get a Quote